LED Pargen
LED Bulb
LED Metal
SDB Board
Stand Fan
Generator
Transformer
Lighting Arrester
DB Board
LT Panel Board
LT Cable
HT Cable
DB Board
Specifications:
- Compatible and ASTA type tested in accordance with IEC 61439-1 & 2.
- Rated insulation voltage up to 1000V
- Main busbars up to 6300A
- Busbar short-circuit withstand capacity up to 100kA for 1 Sec / 65KA for 3 Sec
- Neutral busbars are rated up to 100% of the main busbar and Earth busbars are rated up to 100% of the Neutral busbar
- Tested for Internal Arc Fault as per IEC 61641 up to 100kA (Classified as PSC assembly providing PERSONAL and ASSEMBLY protection under arcing conditions)
- Seismically tested up to 0.75g = 8.0 Richter scale.
- Forms of internal separation from Form 1 to Form 4b
HT Cable
Insulation: HT cables have a layer of insulation for protection of cable from any mechanical or external factors. Most of the HT cables comprises of XLPE insulation.
Conductors: Conductors used in HT cables are Aluminium or Copper. Aluminum is cheaper as compared to Copper. The market price of Copper tends to fluctuate thus the pricing of cables changes with it.
No.of Cores: HT cable comprises of stranded copper or aluminum conductor cores. They are 1 core or 3 core.
Application: HT cables are used in power transmission and distribution that has a range greater than 1.1 kV.
LED Metal
Brass material, usually brass uses H59 copper, which has the advantages of high strength, high hardness, and good plasticity. It can withstand the processing pressure well under hot conditions. If you use copper of lower quality, the parts may break. The copper shell of LED indicators can also be electroplated. The quality of electroplating directly determines the grade of the entire product. The electroplating process is divided into nickel plating and chromium plating.
LED Paragon
APPLICATIONS
- Commercial & industrial buildings
- Perimeter lighting
- Pedestrian and vehicular access areas
- 30W, 2611 lm, 84 l.lm/c.W
- CRI >.8
- CCT 4000K
- Integral driver
- Rated life 35,000 hours
- Die cast aluminium base
- Polycarbonate opal diffuser
- Available with photocell. Add suffix /PC
- Emergency not available
- Other colour temperatures available to order
LT Cable
- Rating : LT cables have a rating from 660 V to 1100 V.
- Armouring: Round or flat armouring, but some LT cables are unarmoured.
- Insulation: LT cables have insulation of materials like polyvinyl chloride (PVC) or cross-linked polyethylene (XLPE).
- Conductors: Conductors used in LT cables is Aluminium or Copper. Aluminum is cheaper as compared to Copper.
- No.of Cores: LT cables include cores from 1 core, 2 core and extend up to 61 cores (LT Control cables)
- Application:Â LT cables have various areas of application. LT cables can be used in industries like power distribution, power stations, railways, etc. revolving around 1.1 kV range.
LT Panel Board
Main LT Panel.
PCC (Power Control Center)
Auto/Manual Synchronising / Load Sharing Panel.
AMF Panels.
MCC (Motor Control Center)
Control and Relay Panel.
Control Desk & Mimic Panels.
Intelligent Switchboards with Computer &
Capacitor Panel
Feeder Pillar
Meter Board
Main Distribution Board (MDB)
Bus Ducts & Rising Mains
Transformer
Power Transformers... A power transformer transfers electricity between a generator and the distribution primary circuits. It gets a little bit confusing because many use the term ‘power transformer’ to encompass a bunch of transformers, rather than a specific design type. Likewise, some even refer to large transmission transformers as power transformers, to easily differentiate between distribution transformers.
